Questions on creating a template
Author Message
BlkPnthr Offline
Junior Member
**

Posts: 3
Threads: 2
Joined: Dec 2007
#1
Questions on creating a template
I have created two templates for my cheques and find that the printer is off by just a little bit. I used absolute precise measurements when creating the templates however, find that the characters that are printed are a tad below the measurements I gave. I have an HP 2605dn laser printer with a slot on the bottom tray for manual feeding and it feeds through the center of the printer.

1. How do I get the printer/program to print where I want it?
2. How can I get the printer/cheque to write under the "Memo" field (or Text Line 2).

I'd like to be able to have my cheque print under the Memo/Text Line 2. How am I able to put something under that field. I thought the "Particulars" field might be that Text Line 2 but, it's not.

Thanks for your assistance in advance.
12-26-2007, 11:45 AM
Find Reply
support Offline
Technical Support
******

Posts: 302
Threads: 19
Joined: Nov 2006
#2
RE: Questions on creating a template
Hello,

The minor deviation of the print out may due many reasons, like Paper feeding, Printer problems, etc.
You can simply adjust all the fields in the template a little bit, says 1 or 2 mm. It should give you a prefect fit then.

The "Particulars" field is only for recording purpose (also for the audit code field).

If you want to print something else on the cheque, you can use some "unused fields" in the template to make it. (like, Place of Issue)
It is a bit tricky, but can fulfill your requirement.
Technical Support
Evinco Solutions Limited
http://www.evinco-software.com
- Provides innovative business software
12-26-2007, 12:21 PM
Find Reply
Benniepep
Guest

 
#3
Cheque Alignment
make four measurments
you can create your own cheque layout with the help of Cheque Layout Design Tool
how?
http://www.evinco-software.com/chequesys...easure.jpg
(This post was last modified: 01-25-2014, 04:58 PM by support.)
01-24-2014, 03:50 PM
Reply
support Offline
Technical Support
******

Posts: 302
Threads: 19
Joined: Nov 2006
#4
RE: Cheque Alignment
(01-24-2014, 03:50 PM)Benniepep Wrote: make four measurments
you can create your own cheque layout with the help of Cheque Layout Design Tool
how?
http://www.evinco-software.com/chequesys...easure.jpg

You need take 4 measurements
top - measure from top edge to the bottom of the field
left - measure from left edge to the left-most of the field
width
height
You need measure every fields on the cheque.

Or you can scan your cheque and email us the copy.
We can prepare the cheque layout for you.
Technical Support
Evinco Solutions Limited
http://www.evinco-software.com
- Provides innovative business software
01-30-2014, 02:39 AM
Find Reply
 
« Next Oldest | Next Newest »

View a Printable Version
Send this Thread to a Friend
Subscribe to this thread |

Forum Jump:

Contact Us | Evinco Solutions Limited | Return to Top